For Sale "06" roller 30 Total races on Chassis $3,500.00 The best of the best

[damhobby]

I have a 2006 dominator chassis. It was raced in 06 and 1/2 of 07. This chassis might be an “06” But you must realize it has less than 30 race’s on it. The included photo’s are of the car as it is for sale. The car is spotless. You would be hard pressed to find a speck of dirt any where. The car as it sits has more brand new parts on it than used. The body panels are high polished aluminum that was anodized red. All radius rods, spindles, spindle arms, wing sliders and related bracketry are also red anodized.

All Included in the roller

Chassis, its white. And clean
It is a coil over car!
(4) ARS shocks (1 is cockpit adjustable)
(4) coils 165, 150,125,110
Full front axle assembly
Full rear 52" splined axle assembly 1 3/4
All radius rods 3 front and 5 rear
Front and rear panhard bar rods with adjusters
Full steering with a stilleto rack, r/r and hyper spindles
Bickenll quick disconnect steering wheel hub
Master cylinder with both petals
Wilwood 4 piston caliper B/N rotor
2 remote wing adjusters and a rear panhard adjuster.
2 sets of wing bracketry
10x10 beadlock left rear (weld) with Hyper wheel center and tire, (hoosier)
10x13 beadlock right right rear (weld) with Hyper wheel center and tire (hoosier)
(2) 10x7 fronts (weld) with Hyper centers and tires. (hoosiers)
Nose wing (wing dynamics) Brand new red anodized side boards
Top wing (wing dynamics) I will ship wing but it needs to be dismantled
Side mount 5 gallon tank
Fiberglass Tail ....................... All body panels

Extra Stuff beyond just the roller

4 extra front axles, with plates (All New)
4 different syles of spindle arms for different Ackerman
2 extra rear splinded 52" axle 1 3/4 (used)
4 sets of right and left nerfs (chrome)
2 front and 1 rear bumper (chrome)
All radius rods I can find that fit this chassis are yours
Left front brake assembly (Hyper)
Wilwood proportion valve

Many more components for this chassis.

Need more photos????? Let me know.

$3,000.00

Dan,......1-585-392-8492 H.....1-585-576-9232 C.....1585-392-0049 O……. ………..dan@stepsnrails.com E-mail

[damhobby]

$ 3,000.00 Takes it all.....................

Originally Posted by damhobby

I have a 2006 dominator chassis. It was raced in 06 and 1/2 of 07. This chassis might be an “06” But you must realize it has less than 30 race’s on it. The included photo’s are of the car as it is for sale. The car is spotless. You would be hard pressed to find a speck of dirt any where. The car as it sits has more brand new parts on it than used. The body panels are high polished aluminum that was anodized red. All radius rods, spindles, spindle arms, wing sliders and related bracketry are also red anodized.

All Included in the roller

Chassis, its white. And clean
It is a coil over car!
(4) ARS shocks (1 is cockpit adjustable)
(4) coils 165, 150,125,110
Full front axle assembly
Full rear 52" splined axle assembly 1 3/4
All radius rods 3 front and 5 rear
Front and rear panhard bar rods with adjusters
Full steering with a stilleto rack, r/r and hyper spindles
Bickenll quick disconnect steering wheel hub
Master cylinder with both petals
Wilwood 4 piston caliper B/N rotor
2 remote wing adjusters and a rear panhard adjuster.
2 sets of wing bracketry
10x10 beadlock left rear (weld) with Hyper wheel center and tire, (hoosier)
10x13 beadlock right right rear (weld) with Hyper wheel center and tire (hoosier)
(2) 10x7 fronts (weld) with Hyper centers and tires. (hoosiers)
Nose wing (wing dynamics) Brand new red anodized side boards
Top wing (wing dynamics) I will ship wing but it needs to be dismantled
Side mount 5 gallon tank
Fiberglass Tail ....................... All body panels

Extra Stuff beyond just the roller

4 extra front axles, with plates (All New)
4 different syles of spindle arms for different Ackerman
2 extra rear splinded 52" axle 1 3/4 (used)
4 sets of right and left nerfs (chrome)
2 front and 1 rear bumper (chrome)
All radius rods I can find that fit this chassis are yours
Left front brake assembly (Hyper)
Wilwood proportion valve

Many more components for this chassis.

Need more photos????? Let me know.

$3,000.00

Dan,......1-585-392-8492 H.....1-585-576-9232 C.....1585-392-0049 O……. ………..dan@stepsnrails.com E-mail

[damhobby]

$3,000.00 Takes it all.

[flatfoot3]

What motor did you have in this car, do you have the motor mounts or radiator for it. I am located in syracuse and i am looking for a car to run indoors.Would you please email me the info and some more pics to dhhmom2@twcny.rr.com. thanks